Welcome to ScapeCrunch
We are ScapeCrunch, the place where planted aquarium hobbyists come to build relationships and support each other. When you're tired of doom scrolling, you've found your home here.
Social Feed
I bought it used off marketplace from a guy who had it with a kegerator. The cylinder looked brand new and unused. Filled it 3 months ago no problem, but all of a sudden it was empty yesterday so I went to fill it. The guy brought it out and said it was leaking. I could feel the gas coming out of the connection between the brass spigot and the cylinder body. It’s a 2.5 lb, and the beverage guy I refill with only has 5lb and up. Maybe I should have just bought one of his tanks, but I’m on my lunch break and barely had time to think. Just super annoyed right now since I’m leaving for a 10 day trip tomorrow morning. I think my tank will be okay, just not looking forward to the algae outbreak later.
3 Replies
·
56 views
Staff member
I Donated 2026
Founding Member
Well, as this thread exists in a few places, I figured why not have it here also. Perhaps we can take up the baton and keep it active and bring some value to hobbyists.
For those of you that don't know, I got into thinking much more about my micros when I read this thread on another forum. It was started by our very own @GreggZ. It was spurred into existence because of our own @Burr740 and his work with micro fertilizers. Some really good discussion followed and a lot was learned.
I don't want to steal Gregg's thunder with this so I hope he posts his current thoughts on the subject and we can all take it from there.
All the best,
Art
For those of you that don't know, I got into thinking much more about my micros when I read this thread on another forum. It was started by our very own @GreggZ. It was spurred into existence because of our own @Burr740 and his work with micro fertilizers. Some really good discussion followed and a lot was learned.
I don't want to steal Gregg's thunder with this so I hope he posts his current thoughts on the subject and we can all take it from there.
All the best,
Art
96 Replies
·
16271 views
Supporting
I Donated 2026
Rockstar
When I was walking around Aquashella Chicago, I crossed paths multiple times with Logan Rando while he was filming. I was wondering if he had posted a video of the show yet so I checked out his channel. No video of Chicago yet, so I instead watched his video of New Jersey. About half way through the video, Father Fish rolls by on his scooter and announces he'll be making an announcement that will destroy the tropical fish industry. LOL! I didn't know Father Fish was actually a speaker at Aquashella. Seems funny that a guy who preaches about not giving money to the aquarium industry was invited to speak. I figured WTH, I'll bite and go to his channel to see what the big news was. I couldn't bring myself to watch the whole thing, but I did scan through it and still don't know what the big Earth shattering news was. Just the same ole preachy stuff and I regret destroying the brain cells. I have to be more careful of that, as I'm older and can't afford to lose many more. I'm sure glad my path into this hobby was seeing the work of Takashi Amano, other knowledgeable aquascapers, and all the great folks in this community.
28 Replies
·
1133 views
Hello, can anyone running the ARC small acrylic reactor on a 40 breeder tell me what your outlet position is and what ph drop or co2 ppm you are getting?
14 Replies
·
401 views
Supporting
I Donated 2026
Rockstar
Article Contributor
Skip to the actual journal here.
I'm known here for high tech, high nutrient, inert substrate scapes -- but I also love NO tech, rich substrate scapes, too!
This thread is three-sided:
But there is a new modern kind of fish bowl, one where plants, substrate, bacteria, water changes, and proper inhabitant selection all work together to create healthy, mini ecosystem-worlds in our homes:
My first bowl attempt in 2020
My second bowl, a true "no tech" in 2021
My third bowl scape (no tech) in 2023, and by far my favorite and most successful!
The point is, these are smaller, affordable, beautiful little worlds of light to enliven our living spaces and create art, nature, and beauty -- often with very little maintenance and upkeep besides a partial water change and feeding the fish.
quano_aqua on Insta
waterplantslover on insta
hanahiyori1112 on insta
Sono aqua pfm on Insta and on Youtube is one of the pioneers of this method, and
deserves a TON of credit for popularizing this technique across many Japanese communities!
kazuaki387 on insta
qball_aquatics on insta has many small bowl scapes.
Nanoscape on insta
syo_aqua_plants on insta follows the "Sono" method.
Aquadream in Vietnam on insta and on Youtube has TONS of no-tech bowl scapes.
Almost 20 bowls in his store/gallery. Lots of info on his youtube channel!
pokomama_medaka on insta
tinyecosystems_ on insta, also sells "kits" to make your own tiny ecosystem jars.
the_bettabowl_project on insta
MJ Aquascaping bowl on youtube, beautiful setup.
MJ Aquascaping vase on Youtube
MD Fishtanks on Youtube has done a few planted no tech bowls
aquashopuha on insta
jp72363 on insta
y0shi_n9 on Insta
kermitDE on Reddit
buiscape on insta has a tiny Fluval bowl scape with crabs!
nakayamachiyomi on insta
ichistarium on insta
chandan0616 on instagram
Few-Focus8050 on Reddit
KrishTheBaker on Reddit and on Youtube
@HardeeParty here on Scape Crunch
@bradquade here on Scape Crunch
10-gal bowl featured on Tank Tested on Youtube
And that's just the ones I have found over the last few years! I have no doubt there are many, many more out there.
I'll add to this thread as I find them, and would love it if you would, too!
I'm known here for high tech, high nutrient, inert substrate scapes -- but I also love NO tech, rich substrate scapes, too!
This thread is three-sided:
- To act as a journal for my new No-Tech bowl scape, and
- To act as a discussion board for no/low tech bowl scapes, and
- To collect and share accounts and examples of bowl scapes from around the world!
But there is a new modern kind of fish bowl, one where plants, substrate, bacteria, water changes, and proper inhabitant selection all work together to create healthy, mini ecosystem-worlds in our homes:
My first bowl attempt in 2020
My second bowl, a true "no tech" in 2021
My third bowl scape (no tech) in 2023, and by far my favorite and most successful!
What does No Tech mean?
In general, it means that these scapes have:- No Filter
- No Heater
- No Air Pump
- No Skimmer
- No CO2
- No Circulation
- A Light (usually low to medium-powered)
- A Substrate (inert, aquasoil, or sand-capped soil like Walstad method)
- Plants (usually quite low-tech plants, though a surprising number will thrive in this method!)
- Inhabitants (Since these bowls are usually between 2-12 gallons on average, this limits selection to nano fish, shrimp, and snails).
The point is, these are smaller, affordable, beautiful little worlds of light to enliven our living spaces and create art, nature, and beauty -- often with very little maintenance and upkeep besides a partial water change and feeding the fish.
Gallery and Links to bowl scapers:
quano_aqua on Insta
waterplantslover on insta
hanahiyori1112 on insta
Sono aqua pfm on Insta and on Youtube is one of the pioneers of this method, and
deserves a TON of credit for popularizing this technique across many Japanese communities!
kazuaki387 on insta
qball_aquatics on insta has many small bowl scapes.
Nanoscape on insta
syo_aqua_plants on insta follows the "Sono" method.
Aquadream in Vietnam on insta and on Youtube has TONS of no-tech bowl scapes.
Almost 20 bowls in his store/gallery. Lots of info on his youtube channel!
pokomama_medaka on insta
tinyecosystems_ on insta, also sells "kits" to make your own tiny ecosystem jars.
the_bettabowl_project on insta
MJ Aquascaping bowl on youtube, beautiful setup.
MJ Aquascaping vase on Youtube
MD Fishtanks on Youtube has done a few planted no tech bowls
aquashopuha on insta
jp72363 on insta
y0shi_n9 on Insta
kermitDE on Reddit
buiscape on insta has a tiny Fluval bowl scape with crabs!
nakayamachiyomi on insta
ichistarium on insta
chandan0616 on instagram
Few-Focus8050 on Reddit
KrishTheBaker on Reddit and on Youtube
@HardeeParty here on Scape Crunch
@bradquade here on Scape Crunch
10-gal bowl featured on Tank Tested on Youtube
And that's just the ones I have found over the last few years! I have no doubt there are many, many more out there.
I'll add to this thread as I find them, and would love it if you would, too!
66 Replies
·
6026 views
Wrapped up my AGA submittal a few weeks ago, and I just can't seem to bring myself to take care of my tank right now 
I think I'm experiencing burnout. I go through these cycles where my tank is all I can think about for a few weeks/months, and then I need a break, and I can't bring myself to do my usual water change and trim schedule. The good news is my tank has so much healthy plant mass that algae doesnt grow even after a few weeks of neglect.
Any tips on fighting this tendency? I think my first idea is to slow everything down, lower my nitrate to more of a zero-bound system and try to reduce my stem trimming frequency. My second idea is making my water change easier. Right now the hardest part is siphoning detritus into buckets that I walk to the toilet. After that I pump the tank down the rest of the way. How do you guys do this? I would siphon straight to the toilet but I'm bound to accidently send a shrimp to their doom that way.
I think I'm experiencing burnout. I go through these cycles where my tank is all I can think about for a few weeks/months, and then I need a break, and I can't bring myself to do my usual water change and trim schedule. The good news is my tank has so much healthy plant mass that algae doesnt grow even after a few weeks of neglect.Any tips on fighting this tendency? I think my first idea is to slow everything down, lower my nitrate to more of a zero-bound system and try to reduce my stem trimming frequency. My second idea is making my water change easier. Right now the hardest part is siphoning detritus into buckets that I walk to the toilet. After that I pump the tank down the rest of the way. How do you guys do this? I would siphon straight to the toilet but I'm bound to accidently send a shrimp to their doom that way.
36 Replies
·
633 views
I Donated 2026
(I hope this is acceptable as the start of a journal, new here).
Greetings, I’m Alec and this will be my third aquascape. I plan on rescaping my 60p (current scape pic below). The first time I did it, I sort of winged it in the moment. The second time, I came in with a design but it wasn’t strong enough and slowly was buried by aquasoil and plants.
So this time I’m coming in with those learnings and trying to design with intention.
Second pic below is my potential new hardscaping.
I have never done an island composition, and usually I am not a fan of them visually. But while messing around with my rocks I found this tower layout impressive.
My idea is to have the right side be a lower sandy area with some smaller rocks (not shown in pic) along with my big ass Anubias and the various crypts as well. Floaters would be above this area.
Front middle and left would be the Monte Carlo carpet, along with some Ludwigia or other stems tucked along the rocks to become bushes.
Tucked into the cracks of the rocks would be Monte Carlo & Java moss to accent it, along with my Hygrophilia.
Back-left would be stem-city. Big Rotala area with some Bacopa and Ludwigia in front of it, especially towards the center.
The middle area surrounding the top tower rock itself would be Cardamine Lyrata, as it grows naturally well in vertical bushes.
Focal point to the right of the top of the tower stone would be Ludwigia Diamond, which gets decently red.
Looking for potential feedback from those with more experience! Some of my concerns:
1. My Anubias are massive, at least for the small. I’m mostly saving them for my fiancés betta tank we hope to setup later this year. I’m a bit worried they won’t fit well into the right side area.
2. The tower is very central, which is the point of island compositions, but I worry my plants might detract from the island look, especially with my plans for the left side.
3. A commenter on my Reddit thread suggested I remove the left side “slope cliff”, instead do another smaller tower there with a sand path. Thoughts?
Thank you for reading. I will probably update this journal with other composition ideas & tweaks as I go, and of course progress pics once I actually rescape it.
Greetings, I’m Alec and this will be my third aquascape. I plan on rescaping my 60p (current scape pic below). The first time I did it, I sort of winged it in the moment. The second time, I came in with a design but it wasn’t strong enough and slowly was buried by aquasoil and plants.
So this time I’m coming in with those learnings and trying to design with intention.
Second pic below is my potential new hardscaping.
I have never done an island composition, and usually I am not a fan of them visually. But while messing around with my rocks I found this tower layout impressive.
My idea is to have the right side be a lower sandy area with some smaller rocks (not shown in pic) along with my big ass Anubias and the various crypts as well. Floaters would be above this area.
Front middle and left would be the Monte Carlo carpet, along with some Ludwigia or other stems tucked along the rocks to become bushes.
Tucked into the cracks of the rocks would be Monte Carlo & Java moss to accent it, along with my Hygrophilia.
Back-left would be stem-city. Big Rotala area with some Bacopa and Ludwigia in front of it, especially towards the center.
The middle area surrounding the top tower rock itself would be Cardamine Lyrata, as it grows naturally well in vertical bushes.
Focal point to the right of the top of the tower stone would be Ludwigia Diamond, which gets decently red.
Looking for potential feedback from those with more experience! Some of my concerns:
1. My Anubias are massive, at least for the small. I’m mostly saving them for my fiancés betta tank we hope to setup later this year. I’m a bit worried they won’t fit well into the right side area.
2. The tower is very central, which is the point of island compositions, but I worry my plants might detract from the island look, especially with my plans for the left side.
3. A commenter on my Reddit thread suggested I remove the left side “slope cliff”, instead do another smaller tower there with a sand path. Thoughts?
Thank you for reading. I will probably update this journal with other composition ideas & tweaks as I go, and of course progress pics once I actually rescape it.
13 Replies
·
1349 views
I’m considering adding an ATO to my UNS 60U mainly to keep the water level consistent from evaporation, especially when I’m away
I’ve narrowed it down to a few options like the Tunze Osmolator 3 Nano, XP Aqua Duetto², and FZONE QST2.0, but I’m open to other recommendations
My biggest concern is reliability and overfill protection. Since this is a relatively small tank, it wouldn’t take much of a sensor malfunction or pump running too long to raise the water level significantly. I’d really prefer something with a backup/failsafe or some type of protection that shuts the pump down if the primary sensor fails
I’m also trying to keep the equipment inside the tank as small and unobtrusive as possible. That’s one reason I’m hesitant about the Tunze Nano. I trust the brand, but the sensor assembly looks pretty bulky for a smaller rimless planted tank
For those actually running an ATO on a planted/freshwater tank:
What system are you using, how long have you had it, and have you ever had it overfill, fail to top off, or have sensor issues?
I’m especially interested in anyone who has used one of these long enough that they’d actually trust it while away on vacation
8 Replies
·
77 views
I'm looking to switch ferts I have a 20g low tech and 40g high tech both currently getting a mix of apt 1 and 3. I'm wanting to switch to pps pro using the gla salts (cheaper and gets my foot in the door with the dry ferts) for both tanks, but I've seen some recommend against it for low tech, I have no issues dosing daily, actually prefer it, and if I understand correctly, its actually better for the tank as far as stable nutrient levels. My question is, can this be done? Is it really that much of an issue to go pps pro on a low tech? I really want 1 solution (i.e. macro micro mixes) for both problems (the two tanks (obviously they'll need their own amounts as for as dose size)). I'm limited to 20 gallons of clean water at a time (remineralized with apt sky plus to 6 GH since I have neos, amanos and snails) due to space constraints so I can either do weekly 25% changes on the tanks or 50% changes every other week. Any and all input is welcome. TIA 
9 Replies
·
386 views
I recently added a small adjustable powerhead/wavemaker that's set to constant flow mode to increase surface agitation, gas exchange, and overall circulation. The goal wasn't to reduce CO₂, but to use stronger gas exchange along with adequate injection to get CO₂ up quickly before lights-on and then reach a stable equilibrium instead of continuing to accumulate throughout the photoperiod
Big thanks to @Dennis Wong / 2Hr Aquarist for his articles explaining this approach. I've learned so much from them. It's completely changed how I look at CO₂ injection and surface agitation
For testing I'm using a freshly calibrated Apera PH60 for pH, Hanna Checktemp 1 for temperature, and the Hanna HI3818 CO₂ titration kit to check actual CO₂ concentration. CO₂ kicked on at 12 PM, lights came on at 3 PM, and CO₂ shut off at 8 PM
Tank/water parameters: UNS 60U, Controsoil, RO/DI remineralized with APT Sky, GH 5 to 6, KH 0. My best degassed pH reference is around 7.30, so I'm seeing roughly a 1.7 pH drop at plateau. With 0 KH the standard pH/KH chart doesn't apply, so I'm using the Hanna kit alongside pH to track the curve
Today's testing showed a really good trend. The tank was already at pH 5.60 by 2:30 PM, reached 5.59 at lights-on, and stayed essentially flat through 8 PM. Hanna measured approximately 44 ppm at lights-on and 44 to 45 ppm at the end of the injection period. Since I was essentially at plateau 30 minutes before lights-on, I now feel comfortable reducing my pre-light injection from 3 hours to 2½ hours and seeing if I can still reach the same level by lights-on
My original CO₂ target was around 40 ppm, but at this point I'm wondering if it's worth trying to make a microscopic needle-valve adjustment just to knock off ~4 ppm when the curve is this stable
Would you guys leave it around 44 ppm or bring it down slightly closer to 40?
There's no livestock yet, so I'm taking advantage of this time to get everything dialed in. Plants are doing great. Planned livestock is cardinal tetras, pygmy cories, Amano shrimp, and eventually Caridina, and I'm planning to start stoc
king next week
12 Replies
·
343 views
Hi all,
I recently got a second hand Kamoer F4 Pro dosing pump, but have some difficulty setting it up. The problem is the 'flow calibration'. Hopefully any of you has the same dosing pump and knows how to solve this issue.
As far as I can see, I installed all the hardware correctly and updated the firmware to the newest version. I replaced the in- and outlet hoses for new 3 (ID) - 5(OD) silicon hoses. Also did a factory reset in the app (two times already). The problem is when I calibrate a channel (already tried this with both channel 1 and 2), the calibration dose seems to high for the app to accept it. I tried both the 5 sec and 10 sec giving me accordingly a 10 and 20ml calibration dose. When I enter these doses, the app shows the message 'error setting parameter'.
When I filled in at 10 sec that it only 10ml (whereas it was 20ml), the calibration worked and saved successfully.
Edited later 11-10-26: I just tried the original hoses and the same problem occurs. Also get the exact same measures as with the new tubes
Do any of you know how to solve this?
I recently got a second hand Kamoer F4 Pro dosing pump, but have some difficulty setting it up. The problem is the 'flow calibration'. Hopefully any of you has the same dosing pump and knows how to solve this issue.
As far as I can see, I installed all the hardware correctly and updated the firmware to the newest version. I replaced the in- and outlet hoses for new 3 (ID) - 5(OD) silicon hoses. Also did a factory reset in the app (two times already). The problem is when I calibrate a channel (already tried this with both channel 1 and 2), the calibration dose seems to high for the app to accept it. I tried both the 5 sec and 10 sec giving me accordingly a 10 and 20ml calibration dose. When I enter these doses, the app shows the message 'error setting parameter'.
When I filled in at 10 sec that it only 10ml (whereas it was 20ml), the calibration worked and saved successfully.
Edited later 11-10-26: I just tried the original hoses and the same problem occurs. Also get the exact same measures as with the new tubes
Do any of you know how to solve this?
7 Replies
·
206 views