Social Feed

Well I’m done talking about it, it’s time to get this journal started.

I have been really out of it the last year or so in terms of maintaining my own tank, mainly out of frustration with time constraints and inconsistency with dosing etc. However, I have now acquired a dream tank, rimless and with low iron glass like I’ve always wanted. While I loved having a sump and prided myself on putting it together, I’m past that desire. The AIO allows the same benefits with hiding equipment, and overall easier maintenance without climbing in and out of cabinets. Now onto the details of this build.

Tank: Planet Aquariums Tideline 62 Gallon AIO Lagoon

Filtration: (2) 250gph pumps on either side of the tank with center overflow into socks (I’m going to punch holes in the socks for now and stuff with polyfill, reviews state the socks clog way too quickly and there is no replacement sock as the insert is not the common round style). The baffles will be stuffed with the poret foam I have already from my sump for extra mechanical/biological.

Substrate: The bottom layer will comprise of bagged pond soil/peat/earthworm castings/ STS. This will be a thin layer and will mainly act as filler to raise up the cap of APT Feast. This is similar to a substrate setup I did when I first started back up in 2020, And that tank did very well. While capping with sand and relying on the dirt to feed the stems worked well, it did require a little more effort on my end with dosing. I don’t trust myself to be as diligent as some members on here are with their inert subs, so I’m taking the mulligan and using aquasoil as a cap, hence, “dirty soil.” This will be another island style layout, and the surrounding substrate will be comprised of Caribsea Carolina Creek Sand.

Hardscape: River rock (local hardscape center sourced) and malaysian driftwood. I have recently acquired another large piece of wood and I’m sourcing new stone this week, as what I have just isn’t meshing with my current vision for the tank.

Plants: …. I have not solidified my vision of what this scape will look like just yet as I haven’t been able to setup the hardscape to outline the island. The plan is to use a good amount of colorful stems, epiphytes, and potentially moss.

Lighting: I will be ordering the Week Aqua Z400 this week and am excited to test it out.

That’s all for now, more pictures and details to come. I should hopefully have the hardscape setup by the end of this coming week after acquiring more stone and wood.

CO2: Almost forgot, for Co2 injection I have made a DIY Yugang with a locking food storage container. It will be stored in the cabinet and the hook will feed into the return pump chamber on the right. I initially was bummed that I had to sacrifice storage to fit a 5lb CO2 tank under the stand, which also meant getting rid of of the 20lb tank I’ve only been having to fill twice a year. @GreggZ Will appreciate this, my awesome father in law suggested that I hide the co2 tank in the pantry closet which is directly behind that wall and just drill a hole for the co2 line. Since my father in laws word is pure gold in my wife’s eyes, that suggestion was approved! He’s just as much my dad too so I appreciated him supporting the project

Sorry about the dramatic title but I think this topic deserves something monumental as it has and continues to be a persistent pain in the neck for aquarists of all skill levels. Let’s face it, BBA is a tough algae to get rid of once it settles in. This thread is dedicated to its eradication by showing real life treatments and their effects. The hope is that we, collectively, arrive at a process that works.

This is important because there is just SO MUCH bad information out there. It’s inconsistent and all over the place. It is based on what someone heard or read but not on first hand experience.

For example, I just saw a BBA help question posed in one of the Facebook groups. Within 4 hours, there were 85 comments. People suggesting everything under the sun. Here is a sampling:

• reducing phosphates
• Ottos and amano shrimp
• Siamese Algae Eaters (SAE)
• American Flag Fish
• Hydrogen peroxide
• The One Two Punch
• Algae Fix

And I could continue the list. It’s funny and sad at the same time. Such is a Facebook group. Try to find the diamond in the rough. Not easy for anyone.

So, with this background in mind, I present to you the present state of my aquarium on the left. BBA has taken over and is now firmly entrenched on the plants, the AquaSoil, the circulation pump and even on the internal UV filter in the back. You can just make out on the lower left that it is now also growing as a lawn on the AquaSoil.

Let’s not get lost looking backwards, although some background as to how we got here is important and helpful. The tank was neglected for about two months. It’s an automated tank but the CO2 ran out and the light and fertilizer stayed the same.

Format​

This post is in the form of an article. This means that I will be able to take good discussions from posts below and update the article with them as needed. Feel free to let me know if you feel something from the article merits changing.

Background on BBA - what we know to be true​

To be continued…

Been meaning to write this up for a while, so here it is. Over the last few months I've built a full custom controller setup for my 130L planted, CO2 injected tank, running on three ESP32 boards working together. It replaced an ageing Up Aqua CO2/pH controller and turned into a genuinely complete automation system for water changes, dosing, CO2, top-off, and reservoir monitoring. Sharing the overview here in case it's useful or interesting to anyone else down a similar rabbit hole.

The short version​

Three boards, each with its own job:

• Water change controller — drains, refills, remineralises, and doses the tank automatically, sitting mostly idle between weekly changes.
• Tank controller — the brains of day-to-day operation, running CO2/pH control, top-off monitoring, the reservoir, and a small front panel with live readouts.
• Alexa bridge — ties the whole thing into Alexa for voice control and equipment scenes, and handles the feeding routine.

They talk to each other over WiFi and three deliberate hardwired links for the communications that genuinely shouldn't depend on the network as they are safety critical.

Water changes​

Weekly, fully automated. Connect a line from the WaterDrop filter, a drain line that goes outside to the garden or lawn (both with quick connects and manual valves for safety), choose your water change volume in litres, press start and it then:
- runs through safety prompts to ensure everything is connected and safety valves are set correctly.
-prompts to clean prefilters
-prompts to measure remineralisers (calculated on screen, based on your water change volume selection).
-it then drains and refills with RO water. It also turns off/ on smart plugs so skimmers, co2, heaters ect are off for draining then start to turn them on as water fill reaches certain thresholds.

• during refil it remineralises to target GH and KH from a container with a magnetic stirrer with a perialstatic dosing pump that fires at set percentages of fill.
• it then connects to my Chihiros dosing pumps and fires the dosing boosts to preload nutrients (again these doses are scaled with selected water change volume)

-all without me touching anything. In fact it now means I can mow the lawn during water changes!
- It doses potassium bicarbonate for KH, calcium and magnesium sulfate for GH, and boosts macros (nitrate, phosphate, potassium, micros), again, all scaled to my actual water change volume.
Everything's logged, every step confirmed before moving to the next, with a wizard-style setup so I can adjust the fill amount, KH target, and anything else on the fly.
I also get phone updates, the fill solenoid is connected with a flow rate sensor, temperature probe and TDS sensor. So every 10L I get an update on the flow rate, tds and temperature of that 10L fill and average so far, so I can spot any issues. It will also abort the water change, stop filter.

CO2 and pH​

This was the original reason the whole project started. My old analogue controller had a pretty coarse hysteresis, and in low KH water even small CO2 swings move pH more than I'd like. The new controller runs a proper pH probe on a scheduled window, targets a specific pH with a tight, tunable hysteresis, and logs everything continuously. It also catches things a dumb timer never could, a sudden pH crash with the solenoid already closed pointed straight at a CO2 regulator dumping its tank, something I'd never have caught otherwise until it was a much bigger problem. The Atlas Ezo ph sensor setup is elite and far more accurate than my previous setup. I can also see live updates, get phone alerts for certain events and have set safety alets and shutoffs for events like rapid changes in ph.
I have also put a weight sensor under my CO2 bottle so it tells me how full/empty my co2 bottle is and predicts refill date based on useage (this is untested as it's still so new, I don't have the data for it to be accurate.)

Dosing​

Being sick of the Chihiros app occasionally being unavailable this year, I have given over control of the scheduling and setup to my controller. I have my own dashboard and phone app that does this now and can send schedules and settings to the Chihiros pumps. It has taken some trial error and bluetooth sniffing apps to work this out but it is rock solid now.
Four channel dosing pump, fully scripted daily doses plus automatic post-water-change boosts, calculated from my actual verified nutrient targets rather than rough guesses. Doses are triggered automatically the moment a water change finishes.

Top-off and reservoir​

For now, the auto top-off unit itself does the actual work, but the controller now watches the reservoir independently, a proper pressure-based level sensor for the real litre count, plus a simple mechanical float as a dumb, sensor-agnostic backup. If the float ever trips, ATO shuts down immediately and I get a notification, worded differently depending on whether the pressure sensor agrees with the float or not, since a disagreement between the two usually points at the pressure sensor itself needing a look rather than a genuinely empty reservoir. I have some optical sensors on the way, and hopefully by next week the controller is running the ATO independently.

Feeding​

A small but genuinely nice touch. Feeding pauses CO2 injection, filter and skimmer automatically, it's voice activated or you can use a unit mounted button, and the front panel readouts switch to a simple "feeding" display while the filter's off, since the normal sensor numbers would be meaningless with no flow through the lines anyway.

Remote monitoring​

Everything logs to a Grafana dashboard, I have pH, temperature, TDS, reservoir level se sors, it also logs CO2 state, with history of all controller actions that I can actually look back through rather than just a live snapshot. Genuinely useful for spotting slow trends, not just catching sudden problems.

Alexa integration​

Voice control for scenes around water changes, changing settings and feeding, equipment turning off and on automatically at the right points in each process, and a physical feed button that fires the exact same routine as the voice command.

Safety, and why it mattered more than any single feature​

If there's one thing I'd want someone building something similar to take away, it's this. Every automated system that can act on its own needs to fail toward safe, not just work correctly when everything's fine.


A few of the principles that ended up running through the whole build:

• Solenoids fail closed. Power loss means CO2 and water stay off, never on, by hardware design, not firmware logic that could have a bug in it.
• A tripped safety condition can't be quietly dismissed. If something raises an alert, like the backup float, you can acknowledge it, but the system won't let you clear it while the actual problem is still physically present. No accidentally waving away a real fault.
• The one link that has to work regardless of WiFi, does. CO2 and ATO pausing during a water change runs over a direct hardwired connection between boards, not the network. Everything else can be a bit more relaxed about connectivity; that one thing can't be.
• A backup sensor's only job is to disagree usefully. The float switch isn't there to be a second source of truth, it's there to catch the primary sensor being wrong. When they disagree, the alert tells me which one to actually go check.
• Never power anything from two sources at once. Learned that one the hard way, destroyed a board's regulator early on doing exactly that. So it now has wifi firmware updates for each board, to save the USB input power when updating by PC
  
  None of this was designed perfectly the first time either, more caught through actually running it and paying attention than getting it right on paper up front. A few genuine bugs this build taught me: features that were fully coded but sitting behind a switch I'd forgotten to flip on, so they looked complete but never actually ran; a menu screen that could lose progress if you walked away at the wrong moment during a slow calibration step. Both fixed once they showed up in real use, which is really the whole point of building it in stages rather than all at once and hoping. I have spent weeks finding and squashing bugs before I have given over control of the tank to it.
  
  Next on the list:
  Heater/fan control, full ATO control, uninteruptable power unit uninterruptible that alerts me to power outages and turns on air pumps.
  
  It is also in a pretty basic case and the cutouts are purposely oversized. I have ordered smoked acrylic to 'wrap' it in so it appears to be black rectangular box, with only the LED parameter readouts (temp, pH, TDS and ATO reservoir litres) visible through the smoke tinted acrylic and the two black control knobs that wake sleeping OLED screens, all other controls will be behind hinged flaps. I want to make sure all the sensors etc are wired correctly though before I wrap and anchor wiring.
  
  The great thing is, every time I think of something I want to add, it is a coding session with the help of AI and finding the sensors or equipement required. I can wake up with an idea and genuinely have it implemented with an hour or two of soldering and coding. It fits my tank like a glove and is infinitely adaptable. menu setup and setting options all added as I think of them!
  
  I will add some pictures below of the in progress build! I wanted to share in case anyone is thinking of doing the same, with the prices of ESP32s and the sensors (except for the Atlas Ezo chips! which are expensive but well worth it!) it is definitely a project in reach of anyone with a basic idea of code and soldering.

It finally happened!

I've been away for work for a few months, during which I got really into the idea of getting a nice aquarium. While I'd already begun planning out a 125 L / ~30 gal tank, expectations had to be tempered because I'll be gone again for a while soon, and my partner would have to take care of the tank alone during that time. So we chose to settle for a 45 L / 12 gal shrimp tank first to test the waters, with me getting to take care of the 125 L tank after returning from my last long trip some time next year. We already got some of the equipment for the larger tank, which is why some of the things here are somewhat oversized.

Things then happened quite quickly when I found a great deal on our shrimp-tank-to-be in a local group. Initially, we'd planned a dark start and to use that time to settle on a plant list, but this used tank came with some plants already, so I'd appreciate any help with plant IDs and input on how to go forward from here.

This tank is intended to be a medium energy setup that allows for some flexibility in care, such as reducing water changes to every two or three weeks when needed. We're looking at slow and medium speed growers, with only very few if any fast growers. We really like bucephalandra and want a few nice ones!

---

Equipment, flora, fauna
Tank: SuperFish Scaper 45 (45x32x32 cm)
Light: SuperFish Scaper LED 64 (24 W, 16100 Lux, 269 PAR) (I also have a Week Aqua Z400 Pro lying about...), 8 hours a day
Filter: Tetra Ex 1000 Plus (1150 L/h canister filter with 30 ppi foam and some filter wool), surfrace scimmer on intake


Substrate: Tropica Aquarium Soil
Fertilizer: APT 3/Complete, APTe and DIY micros/macros,. Currently dosing 15 mL APT 3 after 50% weekly water change, this should stabilize to 20 ppm NO3 without accounting for uptake
CO2: Injection from 2 kg bottle with JBL Proflora CO2 Taifun Spiral 5 (though this will likely become an in-line diffuser) and an Fzone regulator, starts 2 hours before lights

Hardscape: Mangrove roots and millenium stone, not set up yet

Parameters

• RO/DI remineralized to 6 dGH (4:1 Ca:Mg using CaSO4 and MgSO4), 0 dKH
• pH: 6.2
• CO2: To be measured, 1 bubble every 4 s for now, fair amount of surface agitation (gentle, visible waves)
• NH4: undetectable
• NO2: undetectable
• NO3: 20 ppm

Flora:
There are 10 species in here right now (I think), as well as some Amazon Frogbit and Salvinia minima on top. I think they might be:

• 1 - ???
• 2 - Limnophila sessiliflora
• 3 - Amazon Sword (Echinodorus amazonicus)
• 4 - Echinodorus ?
• 5 - Rotala ?
• 6 - Ludwigia repens
• 7 - Anubias nana
• 8 - Anubias mini coin
• 9 - Hygrophila salicifolia
• 10 - Dwarf Hairgrass
• Hopefully no Duckweed

Fauna (planned):

• Red Rili Blue Body Neocaridina
• Possibly a school of nano fish

---

Looking for advice

I really wanted this to be a journal about planning and setting up a tank and how well we eventually managed to translate our plan into reality, but thought it best to ask for advice on how to proceed from here first. Yesterday evening (it's now ~24 hours later), we got home with the aquarium and after a good cleaning, I filled it with aquasoil and water and planted the healthiest plants before heading to bed.

As you can see, these plants aren't doing too great, and some have quite a bit of algae on them. With live plants on our hands, we're skipping the originally planned dark start. I got the filter from the previous owner (asked him to not rinse it), and even though it's only a tiny HOB, we at least have some beneficial bacteria there. I'm running both filters right now in hopes of seeding the canister filter quickly.

I'd appreciate any help with plant IDs and care tips for the different species to help them grow in more healthy. Any recommended treatments to get rid of the algae? Especially the anubias have some small, black spots on them. The Amazon Sword has some pretty torn up leaves with brown and thin spots.

I'm considering hanging the Z400 Pro (rated at 120 W) quite high up, as it blinds surprisingly little for such a powerful light. Though I have noticed that its hue at the same RGB ratio changes quite drastically as you go down in power. Still, this would give me more control over the lighting, as the current light is fixed at 8 cm above the water surface and can't be adjusted.

---

Future plans

I'm really happy about finally getting into this hobby. We're already super excited and don't even have the shrimps in yet!

For now, I think we'll let the plants recuperate a bit and adjust to the new environment. I think they came from harder water and no CO2. Since we're gone in the weekend, we'll set up the hardscape next week and do a short replant, hopefully that won't bother the plants too much.

Then we'll finalize our personal plant list and begin assembling those, replacing some of the current plants. If you have any favorite plants that would suit this type of environment, I'd love to hear about them!

And last, when we have some nice biofilm developing, we'll add the tiny little shrimps!

---

Updates
Update 2026/07/09
Added some (slightly) nicer pictures of the plants before heading out for work. Have a camera, might as well use it! Hopefully I can post pictures of good looking plants soon. Update update: Well they were nice until the webp compression got to them. Good thing to learn about early on!

Hi all,

Recently I planted my 17L low tech nano. This is the second tank that I have, so I'm a bit anxious but I hope to learn a lot (from you too!).

Specs:
Soil: ADA Amazonia V2 (with Bacter 100) + La plata sand
Stones: WIO Titan stone
Filter: Oase filtosmart 100 thermo
Light: Chihiros CII RGB
Fertilizer: roottabs with NKP, none in watercolumn
Water: RO with Glasgarten GH+ (GH~6)

Plants (all in vitro):
Anubias mini coin
Buce kedagang
Buce needle leaf
Buce pygmaea
Crypt parva
Lileaopsis brasiliensis
Marsilea hirsuta
Monte carlo

Start up:
One month dark start with 2 weeks of large water changes followed by 2 weeks of no WC.
After plants were planted I did a 90% WC. Light is currently on R20, G20, B17 for 6 hours. I will continue with 50% WC 3 times a week coming weeks. TDS is stable around 130ppm.

The par layout with current setting are visualized in the drawing below, the height difference is quite challenging. MC receives par around 100, crypt and lileaopsis around 30-50 par. Anubias and Buce targeted between 20-30 par.



The wood is there for biofilm, not for aesthetics, so maybe I will remove it of keep smaller pieces of it since I noticed it makes cleaning more difficult.

I would love to hear your opinions and feedback, as I am highly inspired by aquascaping (my 35L is a high tech tank to practice on). Would you do anything different with this nano tank (fertilization, light etc)? I'm tempted to add potassium in the watercolumn. Also, does someone have experience with keeping clithon snails in KH<1?

Hey all,
A CO2 drop checker is on my procurement list this week with a new setup in the wings.
That tiny glass bobble we all focus on seems to range from a few bucks to close to $100 so my question is;

What drop checker and or solution would you recommend?

They haven’t changed much since my last tank well over a decade ago but there are several funny looking models out there.
These one’s look like they may be a PITA to change the solution.



Tips?

@Sb1415 Apologies I totally snagged the format of your journal post for this so thank you!

Many moons ago I was an active and contributing member on plantedtank.net, I think at one point I had around 14 scaped tanks going before burnout and life changes. Instead of weekends consisting of maintenance I transitioned to camping/boating and life has been great. I’ve always missed it. After downsizing and making a move to a new home I kept only a small 12x12 cube tank that started life as an amateur iwagumi layout, Seiryu and hairgrass only. I put it on the nightstand beside my bed and added some of my favorite Anubias and crypts from taken down tanks. Its been sitting there running for 5-6 years now, low light, top offs only w tap. Maintenance when it got out of control. Super old aquasoil now flattened out to a thick 4-5 inch thick layer in a perfect line front to back.

In Aug/Sept 25 had a bit of a health issue that kept me in bed for several weeks recovering while I looked at this sad little cube, mostly healthy but not truly thriving. No fertilizer being added for years, GDA covered anubias leaves that also were many years old and I thought to myself I should make this better… that was the tipping point. OK I’ll do a deep clean on the substrate, get some stems to throw in there, maybe get a carpet going. Tissue cultures/stems ordered and I got to work. No more top offs, 10% water changes instead. TDS ~900 when I started. Ultimately everything melted back and didn’t grow well. I’d been keeping the lighting so dim all these years to maintain just the crypts/epiphytes without it turning into a mess and I was ok with it again. That was the spark.



I decided I wanted to build out a new tank, most of my old hardware/tanks I had let go of in a bulk way so I was going to have to start new with everything sans some 5 gallon buckets of Amazonia that I’d placed in the basement of the new house.. Phoenix rising from the ashes? Most likely more like algae emerging from the depths. I still consider myself a beginner and maybe amateur at best so yeah…

So I got to work again reading, researching, what’s new, what has changed since I’ve been out of the loop for so long? Ooo dark start that sounds much better, in line CO2 diffusers cool! CO2 reactors, pretty awesome sounding, 2Hr aquarist read every article, and I’m back in baby!

Tank inspiration

None really hence no name, it fit right into a slot to occupy my mind from a not so great situation that I was in and I’m ok with that. Ultimately I’d like this to be a low-mid energy tank that can have minimal amounts of weekly maintenance while still looking the part. I’d prefer to keep it as simple as possible while still having some high tech bits. Get all the equipment out of the tank, co2, low-mid level lighting, minimal/simple fertilization. I got busy ordering equipment and started brainstorming layouts and what hardscape materials I could find. Instagram was my friend for a while, seems that everything that kept grabbing my attention were island style layouts with a very thin layer of sand surrounding. I’ve also always been partial to big chonky pieces of driftwood, I thought to go the manzanita route but wysiwyg pieces were fetching stupid prices. I ran across this ironwood in a listing and couldn’t let it go. The deep lines in the bark were just calling me so I quick snap ordered it before my brain could process dimensions, I knew it would fit but didn’t fully visualise how much it would ultimately limit the layout. I wanted to stay mostly inert with stone and eventually/begrudgingly ordered the tumbled lava stone with the intention of keeping it to a island/river layout style and mimicking some of my found instagram muse tanks. It will mostly likely end up more nature style although the start will be more Willy Wonka than anything. Thanks @Burr740 for that, I shopped like a kid in a candy store.

Equipment

Tank

• UNS 90L
• 90 cm x 30 cm x 30 cm
• 79 liters or 21 gallons by volume, 62.5 liters or 16.5 gallons actual w hardscape

Filter

• Oase Thermo 200
• Replaced the charcoal media with more ceramic from Oase
• Replaced w Fzone stainless steel -Fzone glass Lily w skimmer ⅝”
• Replaced tubing with UNS pro tubing ⅝”
• Fzone Quick release ⅝” so Lily pipes can be cleaned without having to reprime filter

CO2

• Gla inline atomizer - replaced Fzone Co2 inline diffuser ⅝”
• GLA dual stage - replaced Fzone pro series dual stage regulator w/ 5lb tank
• Timed on 3 hours before lights on, off 1 hour before lights off

Water

• Using distilled by gallon, remineralized with salty shrimp GH targeting GH around 4-5
• Hoping for 0-1 KH
• Dark start cycled with prime dechlorinated Tap and APT Start

Substrate

• 80% old used ADA Amazonia v1, small bits sifted and bagged to create slight slope
• 2HR Feast topped to around 2 inches
• UNS Bora sand
• UNS Kona pebbles

Lighting

• Fzone Bright 90 - 90CM
• Before hardscape made rough par map using photone with diffuser iPhone 15 Pro
• At 100% top 404, mid 219, base 127 PAR
• At 50% top 190, mid 110, base 62 PAR
• Will be starting tank with 45-50% lighting intensity
• Timed at 3pm-9pm photoperiod with 60 minute ramps
• Current Colorcast LED strip w/frosted background
• Timed scenes for dawn (orange 1 HR during pre-ramp) /daylight (green during ON cycle) /sunset (red 1 HR during post-ramp) /night (indigo 1 HR after lights out)

Hardscape

• Arizona Ironwood
• Black tumbled lava stone

Ferts

• APT 1 and 3 dosed at recommended levels per calculator
• APT Jazz - in 3-4 months as Feast gives out
• Trying to keep it simple with fertilization to start

Current status, ending dark start, overcast next few days so removed the cardboard surround last night. Took today off work and anxiously awaiting a fed ex delivery with a big box o plants. Here it is in “night” scene mode.

Went to Amazon to order a few more of the Kasa Smart Wi-Fi Power Strip, 6-Outlets | HS300, only to find they are not there anymore. Only the 3-outlet strip is available. Using the link in the previous order, the no longer available message appeared. Snooping around, it appears the line is possibly transitioning to the Tapo brand, with its own app. Kasa products are supported in the Tapo app.

The Tapo Smart Wi-Fi Power Strip appears to be the same as the Kasa with different branding, a different app, and a higher price.

I expect that over time the entire line will transition.

Well... thats it! Im tired of watching you guys have all the fun so figured it was time to start my own journal to document this new scape Im working on, and also to talk about other plant happenings. So here goes

For this year's AGA Id been planning on using the 75P again. Love the dimensions, 30"x18"18" about 37 gal. Its in the living room along with the 75 gal ex-Dutch.

I try to keep these two a little more display-worthy than the back room back tanks but it doesnt always happen. Here's the 75p currently. Plants closed up its the middle of the night, I just flipped two bulbs on to take a quick pic

Ive been tossing some ideas around but it nothing has really inspired me lately



So I decided to try a couple things in the 75 gal and see if the almighty elusive muse will show up

I rarely have a plan going in, usually just an idea or two like maybe a street or focal points, and from there I just start sticking things around and see how it looks. Usually with just whatever plants I have enough of, even stuff that I know I wont end up using just to plot out general areas and color

So here we go starting about two months ago, with basically two streets and a focal point. Pics are 3-4 weeks apart. I'll spare you the details of every little plant move, basically just adding/moving stuff around between then and now

*ignore the weird color filter on these first few pics




Couple weeks later



Trying to find a place to use this dynamite Blyxa sp Red. Not to be confused with the "sp Red" currently being offered by a couple larger retailers. Those are likely to be other aubertii variants that may or may not actually turn red. A good rule of thumb for blyxa (since most cant grow emersed) is if it aint red when you buy it, dont count on it turning red. This one is like a tall Novoguineensis, tops out around 12"-14" with good vertical leaf formation, and stays red under most light



Added Ludwigia white to the front right corner



Dont like the Blyxa in the focal spot either. It'd need a bright green behind it, which would make all the other background groups need repositioning based on color. Plus the Blyxa is too tall for what Im trying to do here, I want this focal spot low in the tank, not high


**Continued next post, image limit reached

Thought I would go back in time a little and create a journal of my first aquascape. This scape is now at the 7 month mark since first planted. I did a dark start for about a month before planting. I'll start with the current equipment, flora, and fauna list. I started with a few different items as you'll see in the photos.

EQUIPMENT:
Tank - Waterbox 3620
Light – Chihiros WRGB II 90cm
Filter – Oase Biomaster Thermo 600 (heater plugged into Inkbird Temp controller)
CO2 Regulator – GLA (Green Leaf Aquariums)
CO@ Reactor – Aqua Rocks Colorado
Fertilizer Doser – Chihiros

PLANTS:
Monte Carlo
Dwarf Hair Grass
Dwarf Sagittaria
Staurogyne Repens
Cryptocoryne Wendtii Green
Java Moss
Phoenix Moss
Anubias Nana Petite
Anubias Nana Pinto
Various types (at least 6) of Bucephalandra
Alternanthera Reineckii 'Mini'
Rotala Green
Rotala Orange Juice
Ludwigia Natans Super Red
Pogostemon Erectus
Hygrophila Pinnatifida

FISH/INVERTEBRATES:
Cardinal Tetras
Kubotai Rasbora
Honey Gourami
Painted Platy (being rehomed)
Chili Rasbora
Exclamation Point Rasbora
Amano Shrimp
Nerite Snails

Miscellaneous:
Seiryu Stone
Manzanita/Ghost Driftwood
2 HR Aquarist APT 1 and APT 3 Fertilizers
ADA Amazonia 2 Aquasoil with root tabs


First aquarium since the 80s.


Initial scape layout. Decided to go with black background later. Also notice, I started with a Fluval Plant 3.0 light. That didn't last long.


Some initial plans on plant layout. I've since seen how @Jeff Miotke and others use a marker on the front glass for hardscape and plant layout and will be trying that for future scapes.


Initial plant order.


1 day after adding first livestock. About 1.5 weeks after planting.


1 month after planting.


2 months after planting.


3 months after planting.


Most recent photo prior to trimming background and carpeting plants way back. Will post a new photo once things grow back in.


The stuff down below.