Welcome to ScapeCrunch

We are ScapeCrunch, the place where planted aquarium hobbyists come to build relationships and support each other. When you're tired of doom scrolling, you've found your home here.

Social Feed

Mr.Shenanagins
Rockstar
Last reply · posted in Journals
IMG_3320.webp
Well I’m done talking about it, it’s time to get this journal started.

I have been really out of it the last year or so in terms of maintaining my own tank, mainly out of frustration with time constraints and inconsistency with dosing etc. However, I have now acquired a dream tank, rimless and with low iron glass like I’ve always wanted. While I loved having a sump and prided myself on putting it together, I’m past that desire. The AIO allows the same benefits with hiding equipment, and overall easier maintenance without climbing in and out of cabinets. Now onto the details of this build.

Tank: Planet Aquariums Tideline 62 Gallon AIO Lagoon

Filtration: (2) 250gph pumps on either side of the tank with center overflow into socks (I’m going to punch holes in the socks for now and stuff with polyfill, reviews state the socks clog way too quickly and there is no replacement sock as the insert is not the common round style). The baffles will be stuffed with the poret foam I have already from my sump for extra mechanical/biological.

Substrate: The bottom layer will comprise of bagged pond soil/peat/earthworm castings/ STS. This will be a thin layer and will mainly act as filler to raise up the cap of APT Feast. This is similar to a substrate setup I did when I first started back up in 2020, And that tank did very well. While capping with sand and relying on the dirt to feed the stems worked well, it did require a little more effort on my end with dosing. I don’t trust myself to be as diligent as some members on here are with their inert subs, so I’m taking the mulligan and using aquasoil as a cap, hence, “dirty soil.” This will be another island style layout, and the surrounding substrate will be comprised of Caribsea Carolina Creek Sand.

Hardscape: River rock (local hardscape center sourced) and malaysian driftwood. I have recently acquired another large piece of wood and I’m sourcing new stone this week, as what I have just isn’t meshing with my current vision for the tank.

Plants: …. I have not solidified my vision of what this scape will look like just yet as I haven’t been able to setup the hardscape to outline the island. The plan is to use a good amount of colorful stems, epiphytes, and potentially moss.

Lighting: I will be ordering the Week Aqua Z400 this week and am excited to test it out.

That’s all for now, more pictures and details to come. I should hopefully have the hardscape setup by the end of this coming week after acquiring more stone and wood.

CO2: Almost forgot, for Co2 injection I have made a DIY Yugang with a locking food storage container. It will be stored in the cabinet and the hook will feed into the return pump chamber on the right. I initially was bummed that I had to sacrifice storage to fit a 5lb CO2 tank under the stand, which also meant getting rid of of the 20lb tank I’ve only been having to fill twice a year. @GreggZ Will appreciate this, my awesome father in law suggested that I hide the co2 tank in the pantry closet which is directly behind that wall and just drill a hole for the co2 line. Since my father in laws word is pure gold in my wife’s eyes, that suggestion was approved! He’s just as much my dad too so I appreciated him supporting the project 👍🏻IMG_3331.webp
45 Replies · 2543 views
A
I Donated 2026
· posted in Fertilizing and Aquarium Chemistry
Anyone tried using seaweed/Kelp extracts in their tanks ? I have been using Seaweed for a pretty long time on my house plants & rose farms & the effects are genuinely good on terrestrial plants was wondering if someone has tried it in their tanks?
I use Intolab's xcell maxima & Compo's Basfoliar Kelp
0 Replies · 22 views
Wildwhimsy
Last reply · posted in Equipment Discussions
IMG_3794.webp
I’m in the process of setting up this 36 gallon bow front. I’m using an oase bio master thermo 250 for my cannister filter and I have inline co2. I’m seeing an issue with circulation, especially in the bottom of the tank. Does anyone have any suggestions? Thanks! (I’m not sure the brand of Lily pipes but they’re the biggest ones I have and were gifted to me.)
4 Replies · 61 views
Dennis Wong
I Donated 2026 Expert in Residence MOTM Winner
Last reply · posted in Journals
I came into some Hygrophila polysperma "white" by Tropica recently. Grew it out and it seems to be able to be shaped into good midground bushes so I decided to create a layout to showcase it. Contemplated whether to use it as the only white plant in the tank, but decided to use some Anubias white petite as well so that the white polysperma doesn't stand out awkwardly.

2hrAquaristDSCF1921 hygrophila white.webp
29 Replies · 1414 views
JayP
Supporting I Donated 2026 Rockstar
Last reply · posted in Lounge
Amazon prime day is less than 2 weeks away so I thought I'd start a thread in advance to discuss any bargains we might see.

The reason this came to mind now was that I just happen to be browsing for other things when I noticed this small curved edge low iron tank pop up. I would probably buy one of these if it drops even lower for prime day.

10 Gallon Ultra Clear Glass Rimless Curved Edge Aquarium
38 Replies · 723 views
JayP
Supporting I Donated 2026 Rockstar
· posted in Lounge
As if Amazon Prime Day wasn't enough to hurt your bank account, Waterbox Aquariums Summer Refresh sale is live. 15% off all freshwater tanks and equipment.

OK, I'll stop enabling you....maybe. :sneaky:

Edit: Tanks are 15% off but cabinets aren't.
0 Replies · 51 views
BenB
Rockstar
Last reply · posted in Lounge
I don't know where I saw it, but I read somewhere that the US imports its CO2. So people were reporting not being able to get it because it is stuck in the Straight of Hormuz. Who knew? Seems weird to me. Anyway, yeah, it's open now, but it might take awhile to get back to normal supply levels. You might want to check with your vendor if you're getting low.
19 Replies · 617 views
  • Like
Reactions: GreggZ
R
Last reply · posted in Journals
Hi guys!

I'm new here, but not entirely new to planted tanks though I've been out of the hobby for the better part of the last decade between kids and moving a couple of times - but finally in a spot where I can do something again. I'm mostly going to be making things up as I go along, but plan on a lot of automation (I want to integrate everything into home assistant) and a lot of DIY as I love the challenge of building things out myself.

The starting point:

I picked up a 90P rimless, low-iron tank on a great deal.

Media (1).webp

I have a rough idea in my head for a stand to be built from plywood - just have a couple other house projects to finish off before starting that built.

Wife says I can only have one aquarium, so for this tank, I want to go all out with a sump to allow for auto top off, and auto water changes, auto fertilizer dosing etc. etc. I have half a plan in my mind.

I've also started on the light fixture which I've modeled up in CAD, and plan on making out of an 8020 extrusion, and some 3D printed bits.
Screenshot 2026-06-01 092809.webp
I'm using bridgelux gen 3 thrive CW (3000k) and WW (5000k) LED strips which have super high CRI at 98+ along with some specific XPE2 wavelengths that I'll solder onto some starboards. Far Red (730nm), Red (654nm), Cyan (495nm), Blue (455nm), Visible UV (415nm). Each segment of the white channels will be on its own driver so I can adjust left to right brightness in thirds, and each colour channel on its own driver so I can vary each channel on a time-based approach.

These will be run from a custom PCB board with Meanwell N-LDD drivers, and will run ESPHome on an ESP32 so it can link up with my Home Assistant installation.
1780321317096.webp

That's it for now, this will probably be a very slow build so be warned if you follow along!
36 Replies · 1576 views
mrmoss
Last reply · posted in Journals
Ive reorganized the order of my tanks so I can better keep track of them ie. Tank 2 moss tank is now tank 3. This helps in any confusion I had when tracking tanks they are in a sort of order now. Rather than taking time editing my old journal id rather create a new thread. Pics will be current (for the most part) as they are posted. I am not aquascaping. I am just farming.
32 Replies · 1459 views
Art
Art
Staff member I Donated 2026 Founding Member
Last reply · posted in Forum News/Feedback
This is the future home for the announcements when someone obtains an achievement badge. Let the games begin!
1986 Replies · 48791 views
  • Like
Reactions: Kwyet
Back
Top