Social Feed

Welcome to ScapeCrunch, @Robert Holt!
We would love to get to know you. Please tell us about yourself. What tank do you have?

Hello Everyone. After a short 2 month wait, I finally received my 6', 235g Planet Aquariums tank. I've decided to document the build here as a way to document it's growth as well as, and maybe more importantly, seek advice as I've already stumbled onto a few 'problems'. So, without further ado, here is what I have so far:

Tank - 235g Planet Aquariums Mega Matrix (72" x 30" x 25")
Sump - 60g Breeder
Lighting - Skylight Hyperspot M (x2)
Mechanical Filtration - RedSea ReefMat 1200
Additional Filtration - Poret Foam (yet to purchase)
Return Pump(s) - Jebao DCP-10000
CO2 Reactor - Yugang from ARC
Dosing - Chihiros 4-Head with Magnetic Stirrer
Heater - 500W Titanium
Controller - Neptune Apex with pH and temp probes
Auto Feeder - Avast Plank
ATO - XP Aqua Duetto using a 35g Brute container filled with RODI water as source water.
Hardscape: UNS Controlsoil - Brown
Pacific Driftwood
Black Sieryu Stone

As a general thought at this point, the Apex will have some basic functions - control the temperature (77-78F), monitor the solenoid on the CO2 regulator should pH venture outside of acceptable ranges, and control the auto feeder. A 'feed mode' will be activated which will turn off the return pump prior to the auto feeder running so that the food is allowed to be eaten rather than washed into the overflow and into the sump filter. Aside from that, not much more is necessary other than simple on/off control for the return pump as the lights are on their own controller.

Controller and board:



ReefMat in sump:



Full shot of rear:


Current Scape - Half Complete:


That's about all I've gotten done so far. Still working on fiddling with the hardscape on the right and then start on the left side. I'm open to any suggestions thus far and thanks for following along!

I’m often out and about working in the field and stumble upon breathtaking examples of often overlooked and under appreciated slices of nature that Florida has to offer.

My neck of the woods is filled with marsh/wetlands ripe with both native and invasive wildlife of all flavors; I want to start a thread where I can document and share.

I’ll update this thread whenever I capture something noteworthy. Much of what catches my eye is aquatic flora, but I try and document anything captivating. I hope you find this as beautiful and fascinating as I do.

The Tonina and Syngonathus continue to grow straight and tall. Based on Dennis’s posts and reading online, it appears that I would have to wait for them to branch out before splitting. But they don’t seem to branch out, anything to be done or just wait?

For anyone wanting a walk down memory lane, I’ve run across episodes of “Guppies to Groupers” on a PBS affiliate website. For the many of you who have no idea what I’m talking about, “Guppies to Groupers” was a PBS program in the mid 70’s hosted by Paul Spiece promoting and providing education on the aquarium hobby.

I’m 64 years old and received my first aquarium when I was 8 or 9. I lived in an area where we were fortunate, if you can call it that, to receive the TV signal from the local ABC, NBC and CBS affiliates. Our closest PBS station was too distant. I only knew of “Guppies to Groupers” by the description in TV Guide. Years later I was finally able to watch the episodes and for whatever reason during a sleepless period last night it popped into my head. It’s really enjoyable to be reminded of how the hobby was when I was first introduced to it. I used most of the equipment shown at one time or another and seeing a corner box filter really takes me a back to a piece of my childhood.

Here’s the link.

I can’t get Scapebid to accept a bid. I’ve entered an amount, and checked the disclaimer, but the Place Bid button won’t turn live. What’s the secret?

Edit: I guess it went through. I thought it would be listed in recent bids. Sorry!

This thread is for the general discussion of the Article Yugang CO2 Reactor - A Guide. Please add to the discussion here.

The adventure begins...again. After a substantial absence from the hobby, I dunked my toe back in last fall with a small 60F shrimp tank, a Chihiros WRGB slim, and a Chihiros CO2 (citric/baking soda) system. A lot has changed since I started this hobby in the 90s, and it's been about 20 years since I tore my last tank down. 'Aquascaping' per se wasn't as much a thing back then. I didn't know anyone running CO2, and LED lights didn't really exist. The 60F was fun, and the shrimp seem happy, but I have been itching to get to building something with more elbow room.

I did happen to find a pic of my old 75 gallon bowfront tank a few weeks ago that was taken just before I tore it down prior to a big move. It ran great for 7 years. Was a simple low tech setup, with one hunk of driftwood, no rocks, plain gravel (no soil) a lot of simple plants (the sword plants did great), and some peaceful fish. Algae wasn't an issue, filtration was pretty subpar by current standards, but the tank did well despite that, and algae wasn't really an issue. Aesthetically blah by today's standards, and certainly not my goal for this build, but I remember being proud of how well this tank ran back then, and wasn't too demanding. Important as my life was very hectic back then.



So, the tech plan so far for the new 150U:


I ordered the tank and stand from UNS, and to my amazement, despite the worst mid-January winter storm we had in some years here, it was delivered on time by the freight company. I do not recommend trying to move a 5ft wide 400+lb tank and stand across snow and ice, down a slope, into to basement. Very thankful to have a tractor with forks, but still was a bit stressful getting this into the house. Miraculously we got it in the house in one piece, and I seriously questioned ever getting a tank larger than this in the future!



It did require disassembly outside the basement door to actually get it into the house around a berm of snow, along with some extra muscle from a few friends. (This was originally meant to be a 120P, until I realized the hardscape plan I had wouldn't quite fit. What's a another foot in length? )



Just getting the tank through the snow and ice was enough, and the base cabinet and tank just sort of landed in the room, and stayed there for a few days while devising a strategy for the next step. After recruiting a tall and strong friend, and sourcing some of those giant suction cup handles you use for moving shower glass walls, a few days later the tank was finally hoisted up onto the base.

As there is a dropped ceiling in the basement my plan was to hang the lights directly above the tank from the ceiling, rather than using a light stand. A few tiles were removed to investigate the structure above, and with some 2x4 extra bracing for the anchors, as none of the joists were in quite the right spot, two Chihiros Vivid 3 lights were installed directly above the tank. At this point I discovered that none of the electrical circuits in the basement were GFCI protected, so obviously that was immediately remedied. Too much gear and too much water to mess around with unprotected circuits.




With the ceiling open, I decided to run the lighting cables over the top of the wall to the left of the tank, and down into the mechanicals room there. The advantage being that the power cords are hidden from view after going through the ceiling tiles, and it's two less large power sources cluttering up the cabinet under the tank. Had to add an outlet in that closet, but I like how it turned out.

With the tank in position and leveled, and the lights finally installed, the next big issue is water. The well water here is liquid limestone. That was the initial mistake I made with the shrimp tank. Sure, neocaridina like hard water, but not THAT hard, and I quickly had to shift to remineralized distilled. I knew before even getting serious about planning this tank that the only reasonable option, for any future tanks here, is RO. The well water might be fine for Malawi Cichlids, but that's not my plan for this tank, but it will be great to have flexibility going forward. It's a big glass box, at just over 140 gallons, and it won't be the only one here (I hope), so the water part I want to get right from the start, and to make it easy to do water changes. The basement is a walkout, so draining water during water changes will be easy, and I would like to make filling it just as easy. I sourced two 70 gallon storage tanks for the RO water from Northern Tool, and ordered a Vectra S2 pump which will help with transfering water between tanks, as well as pumping it out through a hose to the aquarium(s) during water changes. Forgot to take a pic when I was done, but the pvc is all glued up now. I will finish installing the RO unit this weekend.



So, aquarium set up, lights in, and RO system with storage in progress. Next up? The exciting part. Hardscape! I have been hoarding Manzanita, Hakkai stone, and substrate for several months, so I'm excited to move on to the next step! Tank so far pictured below (although I have already removed the privacy film on the back in favor of adding the ARC RGB light screen in part due to the stair rail being visible and distracting. First screen was damaged in transit, so waiting on a replacement).

Welcome to ScapeCrunch, @svat!
We would love to get to know you. Please tell us about yourself. What tank do you have?

Welcome to ScapeCrunch, @GJ3!
We would love to get to know you. Please tell us about yourself. What tank do you have?