Social Feed

Trying a true journal format. Let me know if it's too much writing. My natural tendency is to bullet point everything.​

The Mishap That Started It All​

This whole project began at 6:30 a.m., courtesy of my Oase Biomaster Thermo 250 deciding to serenade me with impeller noise while I was trying to work from home. Biofilm on the impeller — nothing dramatic — but the sound was maddening, especially with an 8 a.m. call with our London office looming. So I did what any aquarist does under pressure: a lightning‑fast pre‑filter and impeller clean.

That’s when the universe decided to intervene.

While disconnecting the hoses — the same routine I’ve done countless times — the lock failed. Suddenly a vacuum of water blasted across the floor of my upstairs alcove “office.” I yanked the intake and outflow from my 60U, stopping the torrent, but not before a solid gallon had soaked into the floorboards.

My wife woke up to the sound of chaos and the sight of me standing in a puddle. Understandably, she was not thrilled. The alcove has cathedral ceilings, so every noise echoes, and the massive 8‑foot cabinet we built with her dad years ago makes cleaning underneath nearly impossible. It’s not a space designed for aquariums, humidity, or early‑morning filter geysers.

As we cleaned, she admitted she hated having tanks and equipment out in the open upstairs. Fair enough. When we built the house, the plan was always for my “stuff” to live in the downstairs office while she had the rest of the house. But during COVID she needed privacy for patient calls, so I gave her the office and moved my stuff upstairs. Now her role has changed — two days in the hospital, one day from home — and the need for that arrangement is gone.

So I floated the idea: What if I moved everything back downstairs, consolidated the two smaller tanks into one larger, beautifully executed setup — something like the living room tank she actually likes? Less noise, less humidity upstairs, and I get a proper scaping space again.

To my mild shock, she was completely on board. From a mishap came opportunity.

Choosing the Tank​

Once the idea settled, I had to pick the right aquarium. I landed on the AquaEl Ultrascaper 90 — the dimensions are perfect, and I’d been eyeing it ever since researching the Skylight Hyperspot and AquaEl’s filter lineup. The tank was designed with the scapers at AquaShow in Poland, and their sample layouts are right up there with ADA, ADG, and Green Aqua imo.

Finding one in the U.S. was the next challenge. I reached out to the AquaEl rep, asked about the Hypermax for my living room tank, and inquired about Ultrascaper 90 availability. He pointed me to Fish Tanks Direct — and with a discount code in hand, I placed the order for the snow variant. My only quandy was to go for the cheaper one and get a Netlea AT5S to hang or try their newer attractive but inferior light option (RGB vs WBG). I chose to try their light as it looked interesting and the PAR on paper is more than enough.

Link for reference:https://fishtanksdirect.com/aquael-ultrascape-90-with-ultra-slim-snow-tank-light-cabinet/

Atlanta Weekend & Tank Comparisons​

Right after ordering, we had a weekend trip to Atlanta for one of my wife’s appointments. On Friday we visited the botanical garden, grabbed food, and while she was at her appointment Saturday, I made the rounds to three local fish stores. The Aquarium was an option but a Saturday solo but spending roughly $100 to be around 10 million families sounded less enjoyable than exploring ATL suburbs and seeing the stores and their tanks.

Premiere Aquatics had a beautiful setup UNS 90U and one for sale as well but at nearly $2,000 out the door it wasn't a great deal. Plus the tank is taller than I wanted, it wasn’t the right fit. I did pick up two gorgeous rose swords and a great piece of ghost wood.

I went to one store in Alpharetta but it was out of literally everything, not sure if they are doing poorly or just sell out fast and under order. I did buy a crinum there. Plus I liked driving from Premier to their.

Then I got lucky at Optimum Aquarium — they had an AquaEl Ultrascaper 90 in stock that had arrived that week, priced at a very respectable $1,000 (without the light). If the cabinet had been white, I would’ve bought it on the spot. They also had a wide range of tanks, which let me compare my choice to the Fluval Opti White 90 (a very reasonable $700) and several Aquatlantis rimless tanks I didn’t even know were available in the U.S. Their shallow 80 is especially cool — tank, stand, and light for $830, I would get a different color but I like the concept. They also had a bunch of healthy Dwarf Sag for $3 dollars so I bought a 4 bunches to use as I couldn't find dwarf chain swords easily online and heleiatium tenellum is a little too small.

My takeaways:

• Fluval Opti White 90: Nice tank but a bit small and too tall, the stand feels cheap and lightweight. Attractive for the price, but not my pick.
• Aquatlantis: Surprisingly impressive. I’d choose them over Fluval at similar price points.
• UNS 90U: The stands are unquestionably superior. The tank mitering is spectacular.
• AquaEl Ultrascaper 90:
  
  • Stand: Best flat‑pack stand I’ve seen, though still a flat‑pack.
  • Glass: Equal quality to UNS but no mitering.
  • Dimensions: 90 × 60 × 45 — absolutely perfect.
    
    • Incredible depth
    • Lower height makes it ideal for seated viewing
    • Easier to work in
    • Better top‑down perspective

I left Atlanta feeling completely validated in my choice and excited for delivery day.

I’m starting this build with no experience in aquascaping other than keeping a large low tech community, fish focussed tank many years ago. I’m pleased with my hard scape but I think that will be the easy part. I’ll document all my ups and downs here and hopefully end up with my dream scape

Aquasys 230L 90x55x53cm
Week Aqua L series lighting
Oase bio master 2 thermo 350
CO2 still to add
Stainless steel Lily pipes
Local basalt pebbles
Spider wood
Tropica Aqua Soil
Sand Foreground

I’m planning a dark start which gives me time to plan the planing and fish. I have some ideas but welcome suggestions!

My wife and I agreed we'd ideally be moving in the next 6-12 months. There's the possibly it could be sooner if the right place pops up, and could possibly be longer, although not ideal. This has made me pause and reconsider setting up my 120p in this house (and a 20 gallon too!). The thought of having the tank up and running for possibly a short period of time before having to break it down and move it sounds pretty terrible compared to moving all of individual components. I currently have my 75p, so I'm not tankless and would need to move that.

Location would still be in the same general region (20-40 mile radius) and we'd likely maintain overlap between homes for a 1 month.

What would you do?

This is the future home for the announcements when someone obtains an achievement badge. Let the games begin!

Welcome to ScapeCrunch, @SkyeScapes!
We would love to get to know you. Please tell us about yourself. What tank do you have?

Time to start a new thread.

I’ll fill in some details later, but I’m working on the hardscape now. Any and all criticism is appreciated. The vision is nothing more, and nothing less, than something appealing to the eye.

90cm x 30cm x 30cm Lifegard Aquatics ultra clear bookshelf tank. Buce and anubias on the hardscape, stems towards the back and center, mid to front carpet with some changes in shade and texture down to a flat grade on the right side of the tank.

Lily pipe inlet and skimmer will be in the back left corner with the outflow in the front left to hopefully achieve circular flow. I’ll be running an in-line diffuser. Light will be the P600 Pro that I regrettably did not upside to 900. Oh well. I’ll mount it high and hopefully it’ll have enough spread.

I have some dragon stone and red lava rock rubble I’ll use at the base to blend into the substrate, as well as some stratum I may or may not cap with.

There are several threads discussing the new Aquael Hypermax 4500BT. I'm sure many would like some reports on it's performance over time. We have a thread discussing nano canister filters. We're all waiting for one of @Naturescapes_Rocco in depth write-ups discussing his filtration set-up. @Pepere and @*Ci* have unique set-ups as well, @Kwyet has used a matten filter, and we have several other members running sumps. That doesn't even include all those running sponge and HOB filters.

The idea is that we can consolidate a lot of filter information in one place making it easier to find rather than searching through so many threads. Maybe this won't work but I thought it was worth giving it a try. Perhaps it may be better listed as an article at some point.

I'm going to get things started by discussing factors I feel are most important to me when choosing a filter.

1) Filtration Performance: This goes without saying. The filter’s primary job is to keep our water clean and free of anything that harms the inhabitants. Of course, there are multiple factors that play into this. Some say flow is most critical, while others claim media volume is most important. Are there other factors? I still have limited experience, but my view, having done considerable reading, is that flow tends to be a bit overblown. You’ll see recommendations of anywhere from 4 to 10 times turnover rate with most leaning toward the higher end of that. I don’t think turnover rate is really the detail to be concerned about, at least with heavily planted tanks like are the norm here. I think the focus should be simply on ensuring flow achieves the goal of effectively moving water through the system to remove toxins/waste, delivering nutrients, and aiding gas (oxygen/CO2) transfer. If a turnover rate of 3 or 4 does that without dead spots in the tank, you should be good. After all, most of us here are plant focused and therefore, the fish we generally have are smaller community species that typically don’t care for high flow (there are, of course, exceptions).

I think there’s a simpler answer regarding media volume; more is better. Obviously, there must be a balance between internal volume and overall size of the filter. Real estate in and around our aquarium stands is precious. Filters like the Fluval FX6 and the newest Aquael Hypermax are huge. If you’re going for one of those, you’re likely putting it on a large tank with plenty of space underneath but again, it’s a matter of finding the right balance that provides the performance you need in a manageable size.

2) Reliability/Durability: This is where solid reviews come in handy and why getting feedback from users here is invaluable. Filtration performance becomes moot if the filter isn’t running, or worse yet, just flooded your house. Being able to easily source spare parts is also valuable, which is why sticking to the top well-known brands is often a safe route. It’s also why many aquarists place canister filters in protective containers, something else to consider when taking into account, size of filter. (this is something I should really do as I’ve had to clean up a few significant spills after filter maintenance and not getting the top secured in place properly )

3) Tie – Maintenance/Noise Level: These two factors are equally important to me. If the filter is a pain to maintain, I’m going to put it off, and that’s bad. It affects the performance. But equally important to me is how noisy it is. I tend to be sensitive to annoying little sounds regardless of where I am; at home, in the car, at work, you name it. If the aquarium is in a part of the house I spend a lot of time in, well then, it’s even more important.
I don’t know if Oase was first to do it, but the idea of the prefilter was, I think, a game changer for many. I imagine it was derived from people installing foam filters on the intake pipes. Having an easily removable section with foam filters that catch a lot of large particles before entering the primary filter chamber is a great idea, resulting in expanded intervals between main filter head removals for cleaning.
Another aspect of maintenance is ease of priming. This could also be an aspect of performance but I don’t think it is quite as important. I’m not sure there is a canister filter that is truly or consistently easy to prime. Some may start out that way, but over time, become less and less so. This is an area I’d really like to see product designers put more serious thought. My experience so far is with Oase and the Fluval 07 series. Hated the Fuval priming and I’m just so-so with the Oase. Let me know your experience with priming other brands.

As for noise, I don’t mind the slight hum of an impeller as long as it’s steady and consistent, much the same way some people, including myself when I was younger, like the smooth steady sound of a fan at night to help them sleep. It’s when the sound becomes inconsistent, I’m bothered. I also don’t care for the sound of splashing/trickling water while I’m focused on other things. Only when I’m camping near the banks of a creek or other body of water is this OK . This is one of the main reasons I’m not a fan of HOB filters. I’m also tweaking my CO2 reactor designs to minimize the bubble sounds of CO2 entering the reactor.

4) Cost: Let’s be clear, the cost doesn’t stop when you pay the retail price for the filter. There’s the cost of media and spare parts plus the cost of electricity. What’s the rated wattage of the filter. I see the Aquael filters claim to consume lower power and are therefore cheaper to run. What about special filter cartridges or foam. Is it easy to cut foam filters from inexpensive bulk material? How often are gasket replacements necessary, or are there common issues with parts failing over time. Of two Fluval 07 filters I’ve used, both needed replacement impeller shafts. Oase Biomaster filters seem to have an issue with the input/output head often needing replaced.
I admit cost isn’t a critical factor for me, but I know it is for many others, so this is another instance where finding the right balance is key, in this case, the balance between price and performance.

Share your thoughts. Do these factors seem to align with yours or do you think I’m way off base. Tell us what types and brands of filters you prefer and why.

​

Landen 100p just chipped near the top center of the left panel. No visible cracks but it's still possible. Should I drain and replace? First photos are after I cleaned off the crushed white glass.

As the title suggests, I would appreciate recommendations from you experts for a good all-in-one fertilizer. My plan is to dose daily using a dosing pump (with additions after water changes.)

Preferences:
Can buy in larger quantities, 500 or more.
Can be purchased somewhere local or with free shipping
Reasonable price is always appreciated.

Links are appreciated. Thanks in advance.

It finally happened!

I've been away for work for a few months, during which I got really into the idea of getting a nice aquarium. While I'd already begun planning out a 125 L / ~30 gal tank, expectations had to be tempered because I'll be gone again for a while soon, and my partner would have to take care of the tank alone during that time. So we chose to settle for a 45 L / 12 gal shrimp tank first to test the waters, with me getting to take care of the 125 L tank after returning from my last long trip some time next year. We already got some of the equipment for the larger tank, which is why some of the things here are somewhat oversized.

Things then happened quite quickly when I found a great deal on our shrimp-tank-to-be in a local group. Initially, we'd planned a dark start and to use that time to settle on a plant list, but this used tank came with some plants already, so I'd appreciate any help with plant IDs and input on how to go forward from here.

This tank is intended to be a medium energy setup that allows for some flexibility in care, such as reducing water changes to every two or three weeks when needed. We're looking at slow and medium speed growers, with only very few if any fast growers. We really like bucephalandra and want a few nice ones!

---

Equipment, flora, fauna
Tank: SuperFish Scaper 45 (45x32x32 cm)
Light: SuperFish Scaper LED 64 (24 W, 16100 Lux, 269 PAR) (I also have a Week Aqua Z400 Pro lying about...), 8 hours a day
Filter: Tetra Ex 1000 Plus (1150 L/h canister filter with 30 ppi foam and some filter wool), surfrace scimmer on intake


Substrate: Tropica Aquarium Soil
Fertilizer: APT 3/Complete, APTe and DIY micros/macros,. Currently dosing 15 mL APT 3 after 50% weekly water change, this should stabilize to 20 ppm NO3 without accounting for uptake
CO2: Injection from 2 kg bottle with JBL Proflora CO2 Taifun Spiral 5 (though this will likely become an in-line diffuser) and an Fzone regulator, starts 2 hours before lights

Hardscape: Mangrove roots and millenium stone, not set up yet

Parameters

• RO/DI remineralized to 6 dGH (4:1 Ca:Mg using CaSO4 and MgSO4), 0 dKH
• pH: 6.2
• CO2: To be measured, 1 bubble every 4 s for now, fair amount of surface agitation (gentle, visible waves)
• NH4: undetectable
• NO2: undetectable
• NO3: 20 ppm

Flora:
There are 10 species in here right now (I think), as well as some Amazon Frogbit and Salvinia minima on top. I think they might be:

• 1 - ???
• 2 - Limnophila sessiliflora
• 3 - Amazon Sword (Echinodorus amazonicus)
• 4 - Echinodorus ?
• 5 - Rotala ?
• 6 - Ludwigia repens
• 7 - Anubias nana
• 8 - Anubias mini coin
• 9 - Hygrophila salicifolia
• 10 - Dwarf Hairgrass
• Hopefully no Duckweed

Fauna (planned):

• Red Rili Blue Body Neocaridina
• Possibly a school of nano fish

---

Looking for advice

I really wanted this to be a journal about planning and setting up a tank and how well we eventually managed to translate our plan into reality, but thought it best to ask for advice on how to proceed from here first. Yesterday evening (it's now ~24 hours later), we got home with the aquarium and after a good cleaning, I filled it with aquasoil and water and planted the healthiest plants before heading to bed.

As you can see, these plants aren't doing too great, and some have quite a bit of algae on them. With live plants on our hands, we're skipping the originally planned dark start. I got the filter from the previous owner (asked him to not rinse it), and even though it's only a tiny HOB, we at least have some beneficial bacteria there. I'm running both filters right now in hopes of seeding the canister filter quickly.

I'd appreciate any help with plant IDs and care tips for the different species to help them grow in more healthy. Any recommended treatments to get rid of the algae? Especially the anubias have some small, black spots on them. The Amazon Sword has some pretty torn up leaves with brown and thin spots.

I'm considering hanging the Z400 Pro (rated at 120 W) quite high up, as it blinds surprisingly little for such a powerful light. Though I have noticed that its hue at the same RGB ratio changes quite drastically as you go down in power. Still, this would give me more control over the lighting, as the current light is fixed at 8 cm above the water surface and can't be adjusted.

---

Future plans

I'm really happy about finally getting into this hobby. We're already super excited and don't even have the shrimps in yet!

For now, I think we'll let the plants recuperate a bit and adjust to the new environment. I think they came from harder water and no CO2. Since we're gone in the weekend, we'll set up the hardscape next week and do a short replant, hopefully that won't bother the plants too much.

Then we'll finalize our personal plant list and begin assembling those, replacing some of the current plants. If you have any favorite plants that would suit this type of environment, I'd love to hear about them!

And last, when we have some nice biofilm developing, we'll add the tiny little shrimps!

---

Updates
Update 2026/07/09
Added some (slightly) nicer pictures of the plants before heading out for work. Have a camera, might as well use it! Hopefully I can post pictures of good looking plants soon. Update update: Well they were nice until the webp compression got to them. Good thing to learn about early on!